Biometric identification systems are always in our world order of the day. We see them in many places, especially the high security such as airports and sensitive areas by some companies in which absolute certainty is the identity of a person is required. Biometric identification systems are limited to one or more physical or behavioral characteristics of natural. Physical characteristics as fingerprints, retinal identification, hand geometry and finger, and even the smell. Identifying characteristics of the behaviorare those on individual behavior, such as voice, hiking gear, or typographical errors rhythm.
Because the technology is more and more people are becoming cheaper and more accessible to the average citizen. Not surprisingly, we are beginning to biometric technology in many devices that we see in our homes. Thus, many manufacturers offer biometric fingerprint devices to provide access to computers. Some high-end cars use biometric fingerprint identification to openthe door and start the vehicle. Many large and small safes incorporate a biometric fingerprint door lock to allow access to content.
There are two different types of fingerprint scanning systems in use today: scanning optical and scanning capabilities.
Optical scanner using a charge coupled device or CCD-like as used in digital cameras and camcorders. A CCD is converting a series of light-sensitive diodes that light into electrical signals. A fingerprint scanner has its own lightSource used to illuminate the ridges of the finger placed on the scanner. Once the fingerprint is captured, it is compared with stored data and access is denied or granted or not.
Scanners skills are a bit 'more complicated optical scanners, the differences in electrical charge rather than the light, creating an image of the fingerprint. The sensor consists of one or more semiconductor chips, which made a very small number of cells contain. These cells areless than the width of a ridge on the finger. This system is what is known as a capacitor. In a process that creates a little 'too much detail here, the computer reads the voltage differences in the ridges and valleys of a fingerprint. In this way, an "image" created, and compared with stored data.
Gun safe storage in an area where this technology is used very efficiently. A gun safe fingerprint biometric can quickly and easily access their content in the grant agreementEmergency to include secure content by anyone without permission.
The locking mechanism of the gun safe fingerprint is the fingerprint is entered, and because no two people have the same footprint as only those who can adapt to the system the contents of a safe access. This is a very valuable benefit, especially if there are children at home.
There are three stages in the operation of a biometric gun safes involved
Registration: The opticalScanner / sensor captures the image of your fingerprint. Storage: In contrast to what we see on television, the real image of your fingerprint is not stored on the system. Software on the computer takes the image that they collected during the registration and converts them into bits of data that can understand and use the computer. This data is then stored in an onboard storage system. In comparison, the biometric lock is by now with your unique fingerprint. Is scanned, the next time through the finger ',Sensor, the computer will retrieve this stored data and compares them with data collected only from the sensor. If the computer determines that the scanning of fingerprints correspond to an acceptable level of data stored, you can allow access to the safe.
These systems will be changed regularly by batteries that must be maintained. If these batteries run out will not be able to ensure access. In this case, however, is not lost. The batteries are stored in a separateForeign trade, which, without the need for access to the same security is available. That being the case, it is recommended that batteries be changed at regular intervals in order to quickly access any time to check.
As biometric technology is refined and distributed in our lives, we can expect to see more and more public places, especially in our homes. It is a technology that should be embraced and used to its full potential, especially when it comes tokeep the family safe and your property.
No comments:
Post a Comment